Description
- Fork reflector for mounting on the front fork / fork leg
- for fork housings with a diameter of up to 50mm
- rounded shape
- Dimensions: L 90mm x W 24mm x H 8mm
- high-quality 3M adhesive, curved adhesive surface
- Color: red
- E-approved - TÜV free - component not subject to registration within the EU
- Contents: 2
Fork reflectors for mounting on an e-bike or e-bike
Our red fork reflectors can not only be mounted on a
motorcycle, quad or moped, but they are also very suitable for
mounting on an e-bike telescopic fork.
The most important thing before mounting is to clean the
surfaces to be glued. These must be absolutely free of dust and
grease.
We use only the best adhesive available for our fork
reflectors: 3M adhesive pads. These guarantee that the fork
reflectors will stay in place well and for a long time. To
mount, carefully remove the protective layer from the 3M
adhesive tape.
Measure the area where the reflector is to be placed and mark
it if necessary using an adhesive tape. The fork reflectors
should be placed at the same height on both sides.
The fork reflectors should be attached at the same height on
both sides.
Stick the reflector onto the fork at the marked points and
press on firmly with your fingers.
Here you can clearly see the overall height of the side fork
reflectors.
Manufacturer: ROGX UG (haftungsbeschränkt), Babower Weg 12, 03226 Vetschau/Spreewald, Deutschland, https://rogx.de, Contact: info@rogx.de
